LUXSTER LIGHT · FOR OMNIBEAM

Your lights.
In your hands.

The white you like. The brightness you need.
All together in one simple app.

For compatible OmniBeam bulbs

Take the setup guide with you.English + Español · 33-page PDF

3500–6500KYour kind of whiteOne app.Up to 6 bulbs.

App preview Tap to take a closer look

Make it yours. Independent color & brightness.

Let weather guide you. Local Auto recommendations.

Keep it organized. Your bulbs, your groups.

01 GET CONNECTED

A good start.
A better first drive.

Already downloaded? Let’s get your bulbs connected. Follow along, one step at a time.

Something not working?

01Power on & allow accessStart with the bulbs and your phone.

Park safely and turn on the lighting circuit for your compatible bulbs. Enable Bluetooth, keep the phone nearby, and allow LUXSTER Light to connect.

Settings → Privacy & Security → Bluetooth → allow LUXSTER Light. For local weather, also allow Location while using the app.

02Connect inside LUXSTER LightNo pairing PIN needed.

Open Device Connection from the menu or connection-status row. Wait for the scan, or tap Scan Nearby Bulbs. If a detected bulb says Tap to connect, tap it.

Check the live count under Connected bulbs. Pair inside the app, rather than from your phone’s Bluetooth device list.

I can’t find my bulbs

03Give each bulb a placeCreate a name, then assign its members.

In Device Connection, create a group such as Aux Lights. Match each bulb’s unique ID to its location, then use Assign to add it to the group.

Aux LightsBulb A + Bulb BExample: two identified, connected bulbs

Creating the name alone does not add bulbs. Group changes save on this phone automatically.

04Choose your lightSelect a group. Adjust. Check the result.

Select your connected group, open Manual, and adjust color temperature or brightness. Release the slider to send the setting, then check the actual bulbs.

Color temperature3500–6500K

Brightness0–100%

Prefer a weather recommendation? Choose Auto with location and internet available. Weather updates need the app active and a working bulb connection.

Explore control & memory in the guide

02 KEEP THE GUIDE

The answers.
Always with you.

From the first connection to the finer details. Save the full guide to your phone and come back whenever you need it.

LUXSTER LIGHT

Setup & support guide

English + Español · 33 pages · 327 KB

Download PDF

First connectionBulb groupsManual & AutoTroubleshooting

Leer en español

Opens in a new tab. Save it from your PDF viewer.
September 2026 · Based on app 0.1.21.

03 FIND AN ANSWER

A little help.
Right when you need it.

Connection, groups, weather—find the answer here, or talk to a person.

We’re here to help.cares@luxsterled.com

Why can’t I find or connect my bulbs?

Confirm the compatible bulbs are powered and keep your phone close.
Check Bluetooth / Nearby devices permission. Older Android phones may also need Location for scanning.
Close bulb-control apps on other nearby phones, then tap Scan Nearby Bulbs in LUXSTER Light.

Wait for Working… to finish before retrying. Connect inside the app; you do not need a pairing PIN.

Full Bluetooth recovery steps

Connected, but the light doesn’t change?

Check that your selected group has connected members. Open Manual, make a fresh slider adjustment, release it, and observe the actual light. Make sure brightness is above 0% and the vehicle circuit is powered.

If only one bulb responds, check the second is powered, connected, and assigned to the same group. A screen preview alone does not confirm the bulb received a setting.

Check the target and bulb response

How do I fix a wrong or empty group?

In Device Connection, make sure each intended bulb is connected and assigned to the correct group. Creating a group name does not automatically add members.

Choose that group on the home screen before sending a setting. All Bulbs affects every connected bulb. Each bulb can belong to one group at a time.

Group setup and recovery

Why isn’t Weather Auto updating?

Allow location while using the app and check internet access. With the app open, select Auto and tap the weather badge to refresh. Check whether the status shows live, saved, or demo weather.

Auto refreshes about hourly while active in the foreground. A closed app or locked phone does not provide continuous weather updates. Manual Bluetooth control can still work without live weather.

Weather and Auto checks

Do I need my phone connected all the time?

Compatible bulbs can retain the last accepted lighting values and use them when powered. Your phone is needed for new app adjustments and weather updates.

After a change, let the output settle before switching power off, and verify memory on your own installation. Reconnecting or returning to Auto can send new settings.

Everyday use and memory

What if I change phones or reinstall the app?

Group setup is stored locally on your phone. Keep a record of bulb IDs and their locations, then reconnect and rebuild groups on the new phone.

Use normal App Store or Google Play updates. Uninstalling or resetting local setup should not be your first troubleshooting step.

Understand remove, forget and reset

Contacting us? Include your bulb model, phone and app version, and a screenshot of the issue.